Cross References
HGR30R4000H (HIWIN)
TR304000N (TBI)
SBI30-4000L (SBC)
R160570431 (Rexroth)
HSR30A2UU+4000LH (THK)
LLRHC30-4000P3 (Ewellix)

These linear guides are applicable to both MSA and SMA series from PMI.

The MSA30 linear guide from PMI with High (H) accuracy grade is designed for applications that require high precision, smooth motion, and reliability under dynamic loads. It is widely used in machine tools, automation systems, 3D printers, and other industrial machinery.

MSA30S is a narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH30CAZAH+ZZ (HIWIN)
TRH30VNNZ0 (TBI)
SBI30SLK2 (SBC)
R165371320 (Rexroth)
HSR30CRZZC1H (THK)
LLRHC30UT1P3 (Ewellix)
HRC35MNV2H (CPC)
The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30LS is a Long Narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH30HAZAH (HIWIN)
TRH30VENZ0 (TBI)
SBI30SLLNK1 (SBC)
R162371330 (Rexroth)
HSR30HRSSH (THK)
LLRHC30LUT2P3 (Ewellix)
HRC30FLV2H (CPC)
The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30LE (Long Flange) is a carriage with installation on both (top or bottom) sides.

Cross References
HGW30HAZAH (HIWIN)
TRH30FENZ0 (TBI)
SBI30FLLNK2 (SBC)
R165371320 (Rexroth)
HSR30HASSH (THK)
LLRHC30LAT1P3 (Ewellix)
HRC30FLV2H (CPC)
The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30E is a carriage with installation on both (top or bottom) sides.

Cross References
HGW30CAZAH (HIWIN)
TRH30FNNZ0 (TBI)
SBI30FLNK2 (SBC)
R165171320 (Rexroth)
HSR30AZZC1H (THK)
LLRHC30AT1P3 (Ewellix)
HRC30FNV2H (CPC)
The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

SL lubricator unit is designed with an oil reservoir which equipped with a high-density fiber net.

Double bidirectional End seal + Bottom seal + Scraper

Double bidirectional End seal + Bottom seal

Bidirectional End seal + Bottom seal + Scraper

Cross References
HGR30T4000H (HIWIN)
TR304000N (TBI)
SBI30-4000L-B (SBC)
R160770331 (Rexroth)
HSR305A2UU+4000LHK (THK)
LLRHC30-4000P3 (Ewellix)

These linear guides are applicable to both MSA and SMA series from PMI.

The MSA30 linear guide from PMI with High (H) accuracy grade is designed for applications that require high precision, smooth motion, and reliability under dynamic loads. It is widely used in machine tools, automation systems, 3D printers, and other industrial machinery.

MSA30S is a narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH30CAZ0H (HIWIN)
TRH30VNNZ0 (TBI)
SBI30SLK1 (SBC)
R162279320 (Rexroth)
HSR30CRSSH(THK)
LLRHC30UT0P3 (Ewellix)
HRC35MNV2H (CPC)
The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30S is a narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH30CAZBH (HIWIN)
TRH30VNNZ0 (TBI)
SBI30SLK3 (SBC)
R162272320 (Rexroth)
HSR30RSSC0H(THK)
LLRHC30UT1P3 (Ewellix)
HRC30MNV3H (CPC)
The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30S is a narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH30CAZAH (HIWIN)
TRH30VNNZ0 (TBI)
SBI30SLK2 (SBC)
R162271320 (Rexroth)
HSR30CRSSC1H(THK)
LLRHC30UT1P3 (Ewellix)
HRC30MNV2H (CPC)
The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30LS is a Long Narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH30HAZ0H (HIWIN)
TRH30VENZ0 (TBI)
SBI30SLLNK1 (SBC)
R162379320 (Rexroth)
HSR30HRSSH (THK)
LLRHC30LUT0P3 (Ewellix)
HRC30MLV1H (CPC)
The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30LS is a Long Narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH30HAZBH (HIWIN)
TRH30VENZ0 (TBI)
SBI30SLLNK3 (SBC)
R162372320 (Rexroth)
HSR30HRSSC0H (THK)
LLRHC30LUT2P3 (Ewellix)
HRC30MLV3H (CPC)
The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30LE (Long Flange) is a carriage with installation on both (top or bottom) sides.

Cross References
HGW30HAZ0H (HIWIN)
TRH20FENZ0 (TBI)
SBI20FLLNK1 (SBC)
R165379320 (Rexroth)
HSR20HASSH (THK)
LLRHC30LUT1P3 (Ewellix)
HRC30FLV1H (CPC)
The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30E is a carriage with installation on both (top or bottom) sides.

Cross References
HGW30CAZ0H (HIWIN)
TRH30FNNZ0 (TBI)
SBI30FLNK1 (SBC)
R165179320 (Rexroth)
HSR30ASSC1H (THK)
LLRHC30AT0P3 (Ewellix)
HRC30FNV1H (CPC)
The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30E is a carriage with installation on both (top or bottom) sides.

Cross References
HGW30CAZBH (HIWIN)
TRH30FNNZ0 (TBI)
SBI30FLNK3 (SBC)
R165172320 (Rexroth)
HSR30ASSC0H (THK)
LLRHC30AT2P3 (Ewellix)
HRC30FNV3H (CPC)
The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30E is a carriage with installation on both (top or bottom) sides.

Cross References
HGW30CAZAH (HIWIN)
TRH30FNNZ0 (TBI)
SBI30FLNK2 (SBC)
R165171320 (Rexroth)
HSR30ASSC1H (THK)
LLRHC30AT1P3 (Ewellix)
HRC30FNV2H (CPC)
The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

SL lubricator unit is designed with an oil reservoir which equipped with a high-density fiber net.

Double bidirectional End seal + Bottom seal + Scraper

Double bidirectional End seal + Bottom seal

Bidirectional End seal + Bottom seal + Scraper

MSB-series applications
Machine Center
NC Lathe
XYZ Axes of Heavy Cutting Machine Tools
Grinding Machine Working Table
Feed Shaft of Milling Machine
Vertical or Horizontal Boring Machine
Z Axis of Boring Machine and Machine Tools
Auto Coating Machine
Industrial Robot
Various High Speed Material Supply Device
Z Axis of Industiral Machine
Binding Machine
EDM
Measuring Equipment
Precision XY Table

These linear guides are applicable to both MSB and SMB series from PMI.

MSB-series applications
Machine Center
NC Lathe
XYZ Axes of Heavy Cutting Machine Tools
Grinding Machine Working Table
Feed Shaft of Milling Machine
Vertical or Horizontal Boring Machine
Z Axis of Boring Machine and Machine Tools
Auto Coating Machine
Industrial Robot
Various High Speed Material Supply Device
Z Axis of Industiral Machine
Binding Machine
EDM
Measuring Equipment
Precision XY Table

These linear guides are applicable to both MSB and SMB series from PMI.

Cross References
EGH30CAZBH (HIWIN)
TRS30VNNZ0 (TBI)
SBS30SLK3 (SBC)
SR30WUUC0H (THK)
MSB30S is a normal length low narrow square type carriage. Fastening holes are only accessible from the top. The MSB-Series is used for the most compact solution for light and normal loads.

The MSB series of linear guideway from PMI is a series with an installation height lower than the standard MSA series. Carriages is available in two lengths: short (MSB-TS) or normal (MSB-S). These linear guides are typically used in applications that require the most compact solution. The MSB series is preloaded from stock to 2% of the dynamic load rating. It can also be ordered with the MSAxxSL lubrication block, which is retrofitted onto the carriage and makes the carriage maintenance-free for 25,000 km under normal conditions.

Cross References
EGH30CAZAH (HIWIN)
TRS30VNNZ0 (TBI)
SBS30SLK2 (SBC)
SR30WUUC1H (THK)
MSB30S is a normal length low narrow square type carriage. Fastening holes are only accessible from the top. The MSB-Series is used for the most compact solution for light and normal loads.

The MSB series of linear guideway from PMI is a series with an installation height lower than the standard MSA series. Carriages is available in two lengths: short (MSB-TS) or normal (MSB-S). These linear guides are typically used in applications that require the most compact solution. The MSB series is preloaded from stock to 2% of the dynamic load rating. It can also be ordered with the MSAxxSL lubrication block, which is retrofitted onto the carriage and makes the carriage maintenance-free for 25,000 km under normal conditions.

Cross References
EGH30CAZ0H (HIWIN)
TRS30VNNZ0 (TBI)
SBS30SLK1 (SBC)
SR30WUUH (THK)
MSB30S is a normal length low narrow square type carriage. Fastening holes are only accessible from the top. The MSB-Series is used for the most compact solution for light and normal loads.

The MSB series of linear guideway from PMI is a series with an installation height lower than the standard MSA series. Carriages is available in two lengths: short (MSB-TS) or normal (MSB-S). These linear guides are typically used in applications that require the most compact solution. The MSB series is preloaded from stock to 2% of the dynamic load rating. It can also be ordered with the MSAxxSL lubrication block, which is retrofitted onto the carriage and makes the carriage maintenance-free for 25,000 km under normal conditions.

Cross References
EGH30SAZAH (HIWIN)
TRS30VSZ0 (TBI)
SR30VUUC0H (THK)
MSB30TS is a short length low narrow square type carriage. Fastening holes are only accessible from the top. Short carriages are mostly used in pairs. The MSB-Series is used for the most compact solution for light and normal loads.

The MSB series of linear guideway from PMI is a series with an installation height lower than the standard MSA series. Carriages is available in two lengths: short (MSB-TS) or normal (MSB-S). These linear guides are typically used in applications that require the most compact solution. The MSB series is preloaded from stock to 2% of the dynamic load rating. It can also be ordered with the MSAxxSL lubrication block, which is retrofitted onto the carriage and makes the carriage maintenance-free for 25,000 km under normal conditions.

Cross References
EGH30SAZAH (HIWIN)
TRS30VSZ0 (TBI)
SR30VUUC1H (THK)
MSB30TS is a short length low narrow square type carriage. Fastening holes are only accessible from the top. Short carriages are mostly used in pairs. The MSB-Series is used for the most compact solution for light and normal loads.

The MSB series of linear guideway from PMI is a series with an installation height lower than the standard MSA series. Carriages is available in two lengths: short (MSB-TS) or normal (MSB-S). These linear guides are typically used in applications that require the most compact solution. The MSB series is preloaded from stock to 2% of the dynamic load rating. It can also be ordered with the MSAxxSL lubrication block, which is retrofitted onto the carriage and makes the carriage maintenance-free for 25,000 km under normal conditions.

Cross References
EGH30SAZAH (HIWIN)
TRS30VSZ0 (TBI)
SR30VUUH (THK)
MSB30TS is a short length low narrow square type carriage. Fastening holes are only accessible from the top. Short carriages are mostly used in pairs. The MSB-Series is used for the most compact solution for light and normal loads.

The MSB series of linear guideway from PMI is a series with an installation height lower than the standard MSA series. Carriages is available in two lengths: short (MSB-TS) or normal (MSB-S). These linear guides are typically used in applications that require the most compact solution. The MSB series is preloaded from stock to 2% of the dynamic load rating. It can also be ordered with the MSAxxSL lubrication block, which is retrofitted onto the carriage and makes the carriage maintenance-free for 25,000 km under normal conditions.

Cross References
EGW30CAZBH (HIWIN)
TRS30FNNZ0 (TBI)
SR30TBUUC0H (THK)
MSB30E is a normal length low flange carriage. The mounting holes are accessible from either the top (S1) or the bottom (S2). The MSB series is used for the most compact solution for light to normal loads.

The MSB series of linear guideway from PMI is a series with an installation height lower than the standard MSA series. Carriages is available in two lengths: short (MSB-TE) or normal (MSB-E). These linear guides are typically used in applications that require the most compact solution. The MSB series is preloaded from stock to 2% of the dynamic load rating. It can also be ordered with the MSAxxSL lubrication block, which is retrofitted onto the carriage and makes the carriage maintenance-free for 25,000 km under normal conditions.

Cross References
EGW30CAZAH (HIWIN)
TRS30FNNZ0 (TBI)
SR30TBUUC1H (THK)
MSB30E is a normal length low flange carriage. The mounting holes are accessible from either the top (S1) or the bottom (S2). The MSB series is used for the most compact solution for light to normal loads.

The MSB series of linear guideway from PMI is a series with an installation height lower than the standard MSA series. Carriages is available in two lengths: short (MSB-TE) or normal (MSB-E). These linear guides are typically used in applications that require the most compact solution. The MSB series is preloaded from stock to 2% of the dynamic load rating. It can also be ordered with the MSAxxSL lubrication block, which is retrofitted onto the carriage and makes the carriage maintenance-free for 25,000 km under normal conditions.

Cross References
EGW30CAZ0H (HIWIN)
TRS30FNNZ0 (TBI)
SR30TBUUH (THK)
MSB30E is a normal length low flange carriage. The mounting holes are accessible from either the top (S1) or the bottom (S2). The MSB series is used for the most compact solution for light to normal loads.

The MSB series of linear guideway from PMI is a series with an installation height lower than the standard MSA series. Carriages is available in two lengths: short (MSB-TE) or normal (MSB-E). These linear guides are typically used in applications that require the most compact solution. The MSB series is preloaded from stock to 2% of the dynamic load rating. It can also be ordered with the MSAxxSL lubrication block, which is retrofitted onto the carriage and makes the carriage maintenance-free for 25,000 km under normal conditions.

Cross References
EGW30SCZBH (HIWIN)
TRS30FSNZ0 (TBI)
SR30SBUC0H (THK)
MSB30TE is a short length low flange carriage. The mounting holes are accessible from either the top (S1) or the bottom (S2). Short carriages are mainly used in pairs. The MSB series is used for the most compact solution for light to normal loads.

The MSB series of linear guideway from PMI is a series with an installation height lower than the standard MSA series. Carriages is available in two lengths: short (MSB-TE) or normal (MSB-E). These linear guides are typically used in applications that require the most compact solution. The MSB series is preloaded from stock to 2% of the dynamic load rating. It can also be ordered with the MSAxxSL lubrication block, which is retrofitted onto the carriage and makes the carriage maintenance-free for 25,000 km under normal conditions.

Cross References
EGW30SCZAH (HIWIN)
TRS30FSNZ0 (TBI)
SBS30FVK1 (SBC)
SR30SBUC1H (THK)
MSB30TE is a short length low flange carriage. The mounting holes are accessible from either the top (S1) or the bottom (S2). Short carriages are mainly used in pairs. The MSB series is used for the most compact solution for light to normal loads.

The MSB series of linear guideway from PMI is a series with an installation height lower than the standard MSA series. Carriages is available in two lengths: short (MSB-TE) or normal (MSB-E). These linear guides are typically used in applications that require the most compact solution. The MSB series is preloaded from stock to 2% of the dynamic load rating. It can also be ordered with the MSAxxSL lubrication block, which is retrofitted onto the carriage and makes the carriage maintenance-free for 25,000 km under normal conditions.

Cross References
EGW30SCZ0H (HIWIN)
TRS30FSNZ0 (TBI)
SR30SBUH (THK)
MSB30TE is a short length low flange carriage. The mounting holes are accessible from either the top (S1) or the bottom (S2). Short carriages are mainly used in pairs. The MSB series is used for the most compact solution for light to normal loads.

The MSB series of linear guideway from PMI is a series with an installation height lower than the standard MSA series. Carriages is available in two lengths: short (MSB-TE) or normal (MSB-E). These linear guides are typically used in applications that require the most compact solution. The MSB series is preloaded from stock to 2% of the dynamic load rating. It can also be ordered with the MSAxxSL lubrication block, which is retrofitted onto the carriage and makes the carriage maintenance-free for 25,000 km under normal conditions.

Double bidirectional End seal + Bottom seal + Scraper

Double bidirectional End seal + Bottom seal

Bidirectional End seal + Bottom seal + Scraper